Rotator Wind Tower Production Line

Ronniewell Wind Tower Production Line , HGK 20T Hydraulic tilting type welding rotator

Quick Detail:

The rotator is mainly used for the basis section flange welding, due to the structure of the wind tower is conical, so the rotator using screw can adjust the rollers' center distance, so that the slope of the tube section adjusted to the weld in horizontal position for welding.

Description:

The whole base of the rotator can be adjust by hydraulic cylinder to adjust the angle of the bracket, which can be tilted in the range of 0-30 degrees for the welding of the flange of basic segment. As a result of hydraulic lift in the form needs to be done basis, so it can use mechanical positioning pin points to different positioning 15-20-30 degree.

Applications:

The rotator is mainly used for the basis section flange welding.

Specifications:

1. Max. loading: 20T
2. Vessel dia. range:1500-5000mm
3. PU roller dia.:350mm*160mm
4. Roller speed:100-1000mm/min
5. Motor power:2*1.1kw
6. Angle adjusting range:15-20-30degree

Competitive Advantage:

• Main elements: Schneider or equal brand
• Inverter: Schneider or equal brand
• Motor: INVERTEK, UK brand
• Wired remote control, and its’ cable is Germany TKD product.
• Cables of Control electric box are using 0.75mm which accord to the national standard.
• Screw bolt strength used in all 8.8, to ensure safety performance, while fully taking into account such as lifting equipment requirements for equipment can be easily installed, position adjustment and maintenance.
• Germany imports of high-quality polyurethane, wheel guarantee replacement within two years